9 Installation of Insulation & Boiler Jacket Panels
•
Place the rear top cover between the side panels
with its knock-outs aligned with the support
bracket (Fig. 31).
NOTE:
In case a Buderus Ecomatic control is
used, install the sensors and capillaries
in the appropriate wells before all top
jacket panels are in place.
•
Slide the lower front cover on the lower portion of
the side panels and secure with sheet metal screws
(Fig. 32).
•
Secure the upper rear cover with screws to the side
panels and rear top cover (Fig. 33).
18
Fig. 31
Fig. 32
Lower front cover
Rear top cover
Upper rear cover
Fig. 33
Rear top cover
Knock-out
Side panel
Screws