Date; Time Clock; Machine'number - Royal 482NT Operating Manual

.' 't
DATEfTlME CLOCK/MACHINE NUMBER
The DATE is designed
~o
rollover automatically every day and prints in the month-day-year format
Extra
Option;.. It desired; a procedure is offered toe/iminate the date from· printing· on
~he,transaction
receipts. ·for
details see Rag 8, Option 1. on Pages 4 2 - 4 3 . ' .
TO P ROGRAM THE DATE
•
"PRG"
+
(MONTH-DAY-YEAR) + (#/ST/NS)
. 6 digit #
Example: To program January 24, 1994:
1.
Tum the key to the "PRG" (PROGRAM) position.
2. If a PRGjZ Manager Password has been programmed, TYPE the (PASSWORD #). then PRESS
the (CHECK) Key, or
if
you did not program a PRGjZ Manager Password. go to Step 3.
3. TYPE
(012494).
then PRESS the (# /ST/NS) Key.
The TIME is designed to use military time. REMINDER: To convert to military time. add the number 12 to every
. hour. Example:
1:15
P.M. will program as
(1315).
Extra Option:
If
desired. a procedure is offered to eliminate
the time from printing on transaction receipts. for details see Rag 9. Option 1. on Pages 42-43.
TO PROGRAM THE TlME CLOCK
The time can print in either the
12
or
24
hour format The default 'Setting is to print in the
12
hour mode which
is
the preferred U.S. setting. To change. see Flag
22
on Page
43.
·PRG" + (HOUR, MINUTES)
+
(QTY
/TIME)
4 digit '"
Example: To program
10:15
A.M.:
1. Turn the key to the 'PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD #). then PRESS
the (CHECK) Key. or
if
you did not program a PRGjZ Manager Password. go to Step 3.
3.
TYPE
(1015).
then PRESS the (QTYJTIME) Key.
The MACHINE NUMBER is designed to assign each cash register its own identifying number. The Machine
Number prints on all receipts/journal records, and management reports.
TO P ROGRAM THE MACHINE NUMBER
"PRG"
+
(MACHINE #)
+
(+ok/PO)
4 digit '"
Example: Program the cash register number to be 1 234:
1. Turn the key to the ·PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed. TYPE the (PASSWORD #), then PRESS
the (CHECK) Key, or
if
you did not program a PRG/Z Manager Password, go to Step 3.
3. TYPE (1234). then PRESS the (+%/PO) Key.
Confirmation Report: The programming of the DATE. TIME and MACHINE NUMBER is done in
a
non-print
mode. To check your results, a Program Confirmation Report is available. For details
see Page
'43.