Tax Table Rate - Royal 482NT Operating Manual

(Continued)
TAX RATE
ADD~ON
TAX TABLE RATE (an alternative t() using the
Fix~d
Rate Procedure)
Re!er to Appendix I to locate the tax table codes listed for your particular state. If your state's
tax
rate is
not listed in Appendix 1,- refer to Appendix II for instructions on calculating your own state's
tax
table codes.
TO PROGRAM A SINGLE TAX TABLE RATE
"PRG"
+
(TAX #)
+
(TAX 1)
+
(STATE TAX TABLE CODE)
+
(TAX 2)
1-4
t
I
Repeat tor each code
Example: The tax code for Arizona's tax rate of 4% is: 121-24009&13-19-23-27-27-1029-25-25-25-1025.
To program: .
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRGjZ Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS
the (CHECK) Key, or if you did not program a PRGjZ Manager Password, go to Step .3.
3. TYPE (1), then PRESS the (TAX 1) Key. The letter ·P" will display until Step 6 is completed.
4. TYPE (121). then PRESS the (TAX 2) Key.
5. TYPE (240096), then PRESS the (TAX 2) Key.
6. Continue typing the State Tax Table Codes mentioned and' PRESS the (TAX 2) Key after each
code until finished.
Note: If
a
mistake occurs during programming the State Tax Table Codes, PRESS the (CLEAR) Key and
begin again with Step 3.
TO PROGRAM A SECOND TAX TABLE RATE
RPRG"
+
(TAX #)
+
(TAX 1)
+
(STATE TAX TABLE CODE)
+
(TAX 2)
1-4
1
I
Repeat for each code
Example: The tax code for Arizona's tax rate of 5% is: 101-190095-11-17-20·21-1021-20-20-20-20-1020".
To program:
1. Turn the key to the ·PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS
the (CHECK) Key, or if you did not program a PRG/Z Manager Password. go to Step 3.
3. TYPE (2), then PRESS the (TAX 1) Key. The letter .p. will display until Step 6 is completed.
4. TYPE (101), then PRESS the (TAX 2) Key.
5. TYPE (190095). then PRESS the (TAX 2) Key.
6. Continue typing the State Tax Table Codes mentioned and PRESS the (TAX 2) Key after each
code until finished.
Note: If a mistake occurs during programming the State Tax Table Codes. PRESS the (CLEAR) Key and·
begin again with Step 3.
Confirmation Report: The programming of the State Tax Table Code is done in a non-print mode. To check
your results, a Program Confirmation Report is available. For details see Page 44.
24