After Quick Start; Quick Start Program Confirmation Report - Royal 482NT Operating Manual

QUICK START
QUICK START: ROYAL 482nt--·
..
1. Insert the Program Key (PRG, 58-090004) in the Control Lock and tum to the ·PRG" program
position.
2. To set the DECIMAL POINT to two places - U.S. standard:
TYPE (2) then PRESS (-%/RA) Key.
Important: In the "REG" (REGISTER) mode, It ·is not necessary to press the decimal point when
ringing up_ a price. .
3. To set the ROUNDING to the nearest whole number - U.s. standard:
TYPE, (50) then PRESS (CHARGE) Key.
4. To set the DATE, use month-<tay-year format Example: For January 24, 1994:
TYPE (012494) then PRESS (#/ST/NS) Key.
5. To set the CURRENT TIME, use military time. Example: To set 10:15 A.M.:
TYPE (1015) then PRESS (QTYJTIME) Key.
*
Reminder: To convert to military time, add .the number 12 to every hour after 12:00 noon.
For example, to set 1 :15 P.M. TYPE (1315). Although the time is programmed using the 24
hour time format, the time can print in the 12 hour format (see Rag 22, Page 39).
6. To set a single fIXed TAX RATE:
a) TYPE (1), PRESS (TAX 1), TYPE the (BASE TAX AMOUNT follOWed by the number 4), then
PRESS (TAX 2).
Example: If Base Tax is .10 cents: TYPE (104), then PRESS the (TAX 2) Key.
*
To determine the Base Tax amount you will need to obtain a copy of your state's Retail Tax
Chart. The BASE TAX amount is the maximum point where no
tax
is charged. For example,
if
no
tax
is charged from .0 cents to
~
10 cents. then .10 cents is the Base Tax.
b) TYPE the (TAX RATE as
a
4 digit number). then PRESS (TAX 2).
Example: If your state
tax
rate is 6%, TYPE (6000), then PRESS the (TAX 2) Key.
*
Note: A
tax
rate of 6.5% will program as (6500). If you wish to program a second or third
tax
rate see Pages 23 and 24 for details.
7. To set DEPARTMENT STATUS for taxing' or non-taxing: (Please note that the factory default setting
of all departments is non-taxable)
a) To progrartl Department 1 as taxable:
TYPE (000001), PRESS (STfWJTAX). then PRESS the (DEPARTMENT 1) Key.
*
Repeat typing (000001) and press the (STfWJTAX) Key before each Department Key you wish
to charge tax.
b) To program Department 2 as non-taxable:
TYPE (OOOOOO), PRESS (STfWfTAX.). then PRESS the (DEPARTMENT 2) Key.
*
Repeat typing
(OOOOOO)
and press the (STfWfTAX) Key before each Department Key you wish
to charge no
tax. .
l~