Table of Contents
Advertisement
BATTERY SYSTEM
BACK-UP BATTERY SYSTEM"
IMPORTANT: The cash register must be plugged in before installing or replacing the back-up batteries •
.
The memory
Is
protected by four "M." batteries that come
With the cash register.
During cash register
operations. all transaction data for the management report
Is
stored in the register's memory. The memory also
holds all the optional program Information. The memory back-up system keeps this information stored In
memory when the register Is turned off. The back-up battery power system maintains programming in the event
of
a power failure or if the register is accidentally disconnected for up to approximately 700 hours if necesSary.
Important: In order to aasure continuous battery back-up protection, H is important that the batteries be
changed
8
minimum of once every year.
INSTALLING OR REPLACING THE BACK;'UP BATTERIES:
NOTE: Four
OM"
batteries are required.
1.
Make sure the register is plugged in and tum the key to
the ·OFF" position.
2.
Open the journal compartment cover. Grip the left side
of the journal cover and gently pull back. The cover will
remain open in an upright position.
3.
Remove the battery cover, located to the rear left section
of the compartment.
4.
Position batteries" making sure that the positive and
negative poles are aligned correctly.
" 5.
Replace the battery cover by sliding down into position.
6.
Close the journal compartment cover and use the Cash
Drawer/Journal Lock Key
~515
to lock it,
if
desired.
EXTENDING THE USAGE OF THE BACK-UP BATTERIES
If the cash register will not be used for an extended period of time, you may want to remove the batteries to
prolong their life. IMPORTANT:
All
transaction data and programming
will
be erased..
9
Hide quick links:
Advertisement
Table of Contents
