Install The Log Assembly And Glass Rock - Heat & Glo ESCAPE-30LP-IFT Installation Manual

H. Install the Log Assembly and Glass Rock
Log Set Assembly: LOGS-I30FB
Models: ESCAPE-I30-C, ESCAPE-I30FB, ESCAPE-I30-F, ESCAPE-30-IFT
CAUTION: Logs are fragile, handle with care.
1
5
3
Figure 1. Log Set Installed
FLAT SPOT FOR LOG #5
Figure 3. Log #1
Log #1 (SRV2201-702): See Figure 2 for additional references. Position Log #1 as shown in Figure 3. Rest the left and
right ends of Log #1 on the burner ledge. The pilot bracket will support the center of the log.
Heat & Glo • ESCAPE-35-IFT, ESCAPE-30-IFT Installation Manual • 2550-980 Rev. B • 6/18
28
6
1
LOG RESTS ON
PILOT BRACKET
REST LOG ON
BURNER LEDGE
SRV2201-702
SRV2201-704
SRV2201-703
BURNER LEDGE
2
4
Figure 2. Reference Points
1
SRV2201-701
3
SRV2201-705
5
SRV2201-706
PILOT
BRACKET
BURNER LEDGE
LIGHT TRAYS
LOG PINS
GRATE BAR
GRATE TINES
2
4
6