Install The Log Assembly - Heat & Glo TRUE-36G-IFT Installation Manual

H. Install the Log Assembly
Log Set Assembly:
LOGS-TRUE36-HD, LOGS-TRUE42-HD
Models: TRUE-36C, TRUE-36H, TRUE-36S, TRUE-36G-IFT, TRUE-36H-IFT, TRUE-36S-IFT,
TRUE-36TG-IFT, TRUE-42C, TRUE-42H, TRUE-42S, TRUE-42G-IFT, TRUE-42H-IFT,
TRUE-42S-IFT, TRUE-42TG-IFT
CAUTION: Logs are fragile, handle with care.
Note: Refractory appearance and material will vary depending on 昀椀replace model.
1 1
2 2
LOGS-TRUE36-HD
LOG PLACEMENT TABS LOG PLACEMENT TABS
CENTER LOG PLACEMENT TAB CENTER LOG PLACEMENT TAB
SIDE LOG PLACEMENT TAB SIDE LOG PLACEMENT TAB
Figure 1
Log #1 SRV2280-741 (TRUE-36), SRV2281-741 (TRUE-42): Locate log placement notch on the bottom of log #1. See
Figure 2. Mate outer notches on the bottom of Log #1 with the log placement tabs. Slide Log #1 toward the rear of appliance
until back side of Log #1 contacts the log placement tabs. See Figures 1-3.
Figure 3
60 Heat & Glo • TRUE-36-IFT, TRUE-42-IFT, TRUE-50-IFT Installation Manual • 2461-980 Rev. Y • 6/23
3 3 4 4 6 6 5 5
1 1
LOG PLACEMENT INSTRUCTIONS
1 1
8 8
LOGS-TRUE42-HD
NOTCH FOR LOG #6 NOTCH FOR LOG #6
Figure 2
7 7
2 2 4 4
3 3 6 6
FLAT SPOT FOR LOG #3 FLAT SPOT FOR LOG #3
1 1
LOG PLACEMENT NOTCH LOG PLACEMENT NOTCH
5 5
8 8