Changing Paper - Siemens Cerberus CS1140 Manual

56.8

Changing paper

Building Technologies
Fire Safety & Security Products
The printer is normally ready to operate, i.e. switched on. To change the paper,
first switch off the printer via the menu (terminal).
B2Q191
7
Legend:
1. Swing out printer (1)
2. Remove printer paper roll (2)
3. Lift flap (3) and insert new paper roll over the roll holder
4. Press the end of the paper (4) lightly against the flap and feed it into the slot of
the printer. Press lever A down to insert the paper.
5. Take up the paper slack using the knurled knob (5)
6. Wind the end of the paper (6) around the take-up reel and fix with paper gripper
(7).
7. Press 'Take up paper' key (5). The paper take up motor is switched on for ap-
prox. 20 sec.
Printing pressure
If the printing pressure is inadequate contact the SIEMENS service department.
Spare paper rolls
Part no. 379977 (= 4 rolls) or
JUJU TP 50KS-A
–
HONSHU PS 65 B1
–
MITSUBISHI F-200 U7X
–
1
2
6
B2Q191 Logging printer
3 4
5
A
8
001260_k_en_--.doc
249
02.2005