Application - Siemens Cerberus CS1140 Manual

B3Q6.. / 565 Control terminal AlgoPilot
43.3

Application

Terminal
Control terminal 'CT'
B3Q660 CTX00xxx
B3Q670
B3Q680
B3Q685
B3Q565 CTYT1xxx
CTYTExxx
CTYTLxxx
CTYT5xxx
43.4 Functions
180
Building Technologies
Fire Safety & Security Products
Remote location for the AlgoPilot:
either with own local power supply or
–
24 V supplied from the control unit
–
Option 9 V battery:
Allows fault indication upon total failure of power supply (mains + battery) –>
–
see page 183
According to application choose the corresponding Flash program file:
international 1) CAX00xxx
China simplified 1) CAYT1xxx
China traditional CAYTExxx
Korea standard CAYTLxxx
Thailand CAYT5xxx
1) Default at factory programmed
The Flash program files are available from OSS.
Interfaces
C-Bus –> Plug-in terminals 'K5'
–
I-Bus –> Connector 'ST1'
–
2 x RS232 –> Connector 'ST2'
–
Parallel indicator panel B3R051/K3R071/072 –> Connector'ST4'
–
Emergency operation circuit –> Plug-in terminals 'K6'
–
Control inputs
external key switch (see Operation enabled)
–
monitoring of autonomous power supply
–
monitoring of Plexiglas door (open / closed)
–
Operation enabled
this is normally done via password at the keyboard
–
An integrated key switch, (photoelectric) is available as an option which can also
–
be used to lock the Plexiglas door (if used).
operation can also be enabled by an external key switch
–
utilization as
Parallel control terminal 'CA'
international
China simplified
China traditional
Korea standard
Thailand
Control terminal and main CPU com-
bined 'CI'
CIX00xxx international
CIYT1xxx China simplified
CIYTExxx China traditional
CIYTLxxx Korea standard
CIYT5xxx Thailand
001260_k_en_--.doc
02.2005