KTM 545 XC ATV EU 2011 Owner's Manual page 135

BRAKES
Info
Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake
fluid.
Avoid contact between brake fluid and painted parts. Brake fluid is corrosive!
Use only clean brake fluid from a sealed container.
–
Remove the front brake linings.
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Press the brake piston back to its basic position and make sure that no brake fluid over-
flows from the brake fluid reservoir.
–
Mount the front brake linings.
–
Correct the brake fluid level to level
Guideline
Dimension
edge of container)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.
302838-10
x ( p. 134)
.

with membrane .
 
x ( p. 135)
.

(brake fluid level below top

p. 207)
5 mm (0.2 in)
133