Table of Contents
Advertisement
MAINTENANCE WORK ON THE CHASSIS
–
Loosen the screws
Alternative 1
–
Insert the tool
ment.
Alternative 2
–
Position the special tool at the rear wheel eccentric element.
Hook wrench (83019011000)
–
To adjust the chain tension, slowly turn the element at the rear wheel or using the spe-
cial tool to rotate the rear wheel eccentric element forward or backward.
Guideline
Chain tension
Info
Rotating the rear wheel eccentric element forward increases chain tension.
Rotating the rear wheel eccentric element backward reduces chain tension.
The rear wheel eccentric element should always be positioned such that the
grease nipple
clearance.
601051-10
–
Remove the tool.
–
Fully tighten screws
Guideline
Screw, rear wheel eccentric element
by four turns.
from the tool set into the hole
140... 145 mm (5.51... 5.71 in)
is visible. This ensures that the vehicle has the greatest ground
.
M8
of the rear wheel eccentric ele-
20 Nm
(14.8 lbf ft)
117
Advertisement
Table of Contents
