Table of Contents
Advertisement
BRAKES
Checking free travel of foot brake lever
11.10
Warning
Danger of accidents Brake system failure.
–
If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust free travel on foot brake lever according to specifications.
–
Mount the locking split pins
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
–
Mount the wheel/wheels. (
100073-10
–
Disconnect spring
–
Move the foot brake lever backwards and forwards between the end stop and the foot
brake cylinder piston bracket and check free travel
Guideline
Free travel at foot brake lever
»
If the free travel does not meet specifications:
–
Adjust the basic position of the foot brake lever.
–
Reconnect spring
601085-10
.
p. 146)
.
3... 5 mm (0.12... 0.2 in)
.
.
x
(
p. 137)
136
Advertisement
Table of Contents
