TUNING THE CHASSIS
A
0 0 A
–
Press the spring pack and the spring retainer
accessible.
–
Using pliers, position the locking clip in one of the upper grooves. Do not overstrain the
securing clip.
–
Release the spring pack and measure the length of the unloaded spring pack.
100083-10
–
Press together the spring pack, position the securing clip in the corresponding groove
and release the spring pack.
Guideline
(Option: KT 770...)
Clip position, spring preload
Standard
Corresponds to a spring preload of
(Option: KT 870...)
Clip position, spring preload
Standard
Corresponds to a spring preload of
400347-10
down to make the securing clip
7 th position from top
5 mm (0.2 in)
8th position from top
9 mm (0.35 in)
75