KTM 545 XC ATV EU 2011 Owner's Manual page 88

TUNING THE CHASSIS
–
Remove the four screws
and set it down.
–
Remove nuts
–
Remove screws
–
Remove screws
–
Place handlebar bridge
tighten screw
Guideline
Screw, steering bridge
–
Mount and tighten screw
Guideline
Screw, steering column, top
–
Mount and tighten screws
Guideline
Screw, steering bridge
100099-10
–
Mount handlebar support
locking nuts
Guideline
Nut, handlebar support
–
Position the handlebar and fix it with handlebar clamps
screws .

. Remove handlebar clamps

and remove handlebar support

and .
 
. Remove handlebar bridge

onto the steering column in the desired position. Mount and

.

.

.

in the desired position using the screws. Mount new self-

and tighten.

, swing the handlebar forward

with the screws.

.

M8 20 Nm
(14.8 lbf ft)
M20x1.5 25 Nm
(18.4 lbf ft)
M8 20 Nm
(14.8 lbf ft)
M10 45 Nm
(33.2 lbf ft)
. Mount and tighten

86