Greasing The Rear Wheel Eccentric Element; Checking The Throttle Cable Routing - KTM 545 XC ATV EU 2011 Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Greasing the rear wheel eccentric element

10.28

Checking the throttle cable routing

10.29
–
Use a grease gun to fill the rear wheel eccentric element via the grease nipple
grease emerges from the left shaft seal ring
Long-life grease (
601052-10
–
Remove the fuel tank.
–
Check the throttle cable routing.
The throttle cable must be routed along the front of the handlebar, through the cable
guide on the steering column and along the upper frame tube to the carburetor.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
–
Install the fuel tank.
B00469-01
.

p. 209)
x ( p. 102)
x ( p. 103)
123
until
