Table of Contents
Advertisement
l
Press the positioning keys to move the
embroidery frame until the center point of
the pattern in the camera view window is
aligned with the chalk mark drawn on the
fabric.
m
Press
to return to the previous
screen.
n
Press the "Start/Stop" button to begin
embroidering.
*
Refer to "Embroidering Patterns" on page 54.
CONFIRMING THE PATTERN POSITION
Using the Embroidery Position
Sticker to Align the Embroidering
Position
The embroidering position can easily be aligned
using the machine's built-in camera and the
included embroidery positioning sticker.
Note
• Depending on the type of fabric that is
used, a part of the embroidery positioning
sticker may remain attached when it is
peeled off. Before using the embroidery
positioning sticker, check that it can be
cleanly removed from a scrap piece of the
fabric to be used.
a
Press
to display the editing
window, and then press
b
Following message appears. Press
The embroidering position will return to the original
position, even if you changed before.
1
.
.
49
Advertisement
Table of Contents
