Table of Contents
Advertisement
USING THE CAMERA TO CONNECT PATTERNS
b
a
c
a Connecting point
b First pattern A
c Second pattern B
d Press to move the second pattern.
Press to rotate the second pattern in a clockwise
arc referring the first pattern as a center.
Press to rotate the second pattern in a
counterclockwise arc referring the first pattern as a
center.
Rotate the second pattern 90 degrees in a
clockwise arc.
Message appears on screen and carriage will move
after pressing
Note
• The second pattern will be automatically
connected to the first pattern without
adjustment. Change the position of the
second pattern manually using
• The position of the second pattern can be
moved using your finger or the included
dual purpose stylus.
• Use
,
the pattern to the corner of the center of the
first pattern, when changing the pattern's
connecting position.
138
d
.
.
or
if you want to align
m
Prepare two embroidery positioning
stickers. Follow the on-screen instructions
to affix the two stickers to the fabric so that
the positioning marks can be detected by
the camera.
Note
• Use the embroidery positioning stickers
included with this product or purchase
replacement stickers (SAEPS2, SAEPS2C,
EPS2: XG6749-001 / 115Z05E000E, EPS2:
115Z05E700E) from your authorized Brother
dealer. If any other sticker is used, the
camera may not recognize it.
• The 182 mm × 257 mm (7 inches × 10
inches) embroidery positioning sticker sheet
with strong adhesive is most appropriate for
connecting patterns (SAEPS2, SAEPS2C,
EPS2: XG6749-001 / 115Z05E000E, EPS2:
115Z05E700E). If any other positioning
sticker is used, it may peel off. If the sticker
peels off, the patterns cannot be
connected.
n
Affix the first embroidery positioning
sticker onto the fabric within the red lines
that now appear on the screen of the
machine by using both hands to press down
on each corner of the sticker. Affix the
sticker with the large circle to the top as
shown on machine. Then, press
The camera detects the first embroidery positioning
sticker.
.
Advertisement
Table of Contents
