Table of Contents
Advertisement
a Size of the pattern
Memo
• In order to maintain embroidering quality,
there is a limit to how much the embroidery
pattern can be enlarged or reduced.
• Some patterns or characters can be
enlarged to a greater degree if they are
rotated 90 degrees.
• If the USB mouse is connected, you can
change the size of the pattern by rotating
the mouse wheel. Rotate the mouse wheel
away from you to shrink the pattern. Rotate
the mouse wheel toward you to enlarge the
pattern.
• You can move patterns using
the window.
c
Press
.
■ Changing the Size by Dragging
You can also change the pattern size by dragging the
a
red point on the pattern image.
Note
• You can change the pattern size with one
finger. Using two or more fingers does not
work.
■ Changing the Size and the Density of
the Pattern
You can change the pattern size while maintaining
the desired thread density. The machine recalculates
the stitch density automatically. With this function,
the pattern will be enlarged or reduced at a larger
on
ratio than with normal pattern resizing.
Note
• Be sure to do trial embroidery using same
fabric and threads as project in order to
check the embroidering results.
• This function cannot be used with character
patterns, frame patterns or border patterns.
However, a border pattern can be edited
after this function has been used.
• Patterns with a large number of stitches
cannot be resized while maintaining a
thread density.
Memo
• Depending on the pattern, the size of the
pattern increases up to 200 % or reduces to
60 %.
a
Press
*
: When you want to increase or decrease the
density of the design. When the pattern size is
changed, the thread density for the pattern increases
or decreases, but the number of stitches is
maintained.
BASIC EDITING
in the size window.
2
65
Advertisement
Table of Contents
