Brother 882-W30 Operation Manual page 139

h
After embroidering of the first pattern is
finished, the following message appears.
Press .
i
When the following message appears, press
.
j
Select the second pattern B, and then press
.
USING THE CAMERA TO CONNECT PATTERNS
k
Press , and then select how the
patterns will be connected.
 The pattern connection setting screen appears.
Memo
• You can edit the second pattern in this
screen.
l
Select the position of the second pattern by
pressing on the screen. Press
specifying the position.
* You can adjust the position of the second pattern
using the keys described below.
3
after
137