Brother 882-W30 Operation Manual page 105

b
Press to loosen the upper thread
tension. (The tension number will
decrease.)
c
Press .
■ Upper Thread is Too Loose
The tension of the upper thread is too loose,
resulting in a loose upper thread, loose thread locks,
or loops appearing on the right side of the fabric.
Note
• If the upper thread was incorrectly
threaded, the upper thread may be too
loose. In this case, refer to "Upper
Threading" on page 22 and rethread the
upper thread.
a Right side
b Wrong side
a
Press .
MAKING EMBROIDERY ADJUSTMENTS
b
Press to tighten the upper thread
tension. (The tension number will increase.)
c
Press .
Note
• The tension of the upper thread can be
adjusted for embroidering on page 8 of the
embroidery settings screen. The selected
setting will be applied to all patterns.
When embroidering, if the overall tension of
the upper thread is too tight or too loose,
adjust it from the setting screen. Increase
the number to tighten the upper thread and
decrease the number to loosen the upper
tension. If an individual embroidery pattern
needs additional fine tuning, refer to
"Adjusting Thread Tension" on page 102.
■ Adjusting Overall Upper Thread
Tension
When embroidering, if the overall tension of the
upper thread is too tight or too loose, adjust it from
the setting screen.
a
Press , and then press
3
.
103