Table of Contents
Advertisement
MAKING EMBROIDERY ADJUSTMENTS
MAKING EMBROIDERY ADJUSTMENTS
Adjusting Thread Tension
When embroidering, the thread tension should be
set so that the upper thread can slightly be seen on
the wrong side of the fabric.
■ Correct Thread Tension
The pattern can be seen from the wrong side of the
fabric. If the thread tension is not set correctly, the
pattern will not finish well. The fabric may pucker or
the thread may break.
a Right side
b Wrong side
Follow the operations described below to adjust
thread tension according to the situation.
Note
• If the thread tension setting is made
extremely loose, the machine may stop
during embroidering. This is not the sign of
a malfunction. Increase the thread tension
slightly, and begin embroidering again.
Memo
• If you turn the main power to OFF or select
a different pattern, the thread tension will
reset to the automatic setting.
• When you retrieve a saved pattern, the
thread tension setting will be the same as
when the pattern was saved.
102
■ Upper Thread is Too Tight
The tension of the upper thread is too tight, resulting
in the bobbin thread being visible from the right side
of the fabric.
Note
• If the bobbin thread was incorrectly
threaded, the upper thread may be too
tight. In this case, refer to "Setting the
Bobbin" on page 20 and rethread the
bobbin thread.
a Right side
b Wrong side
a
Press
.
Advertisement
Table of Contents
