Table of Contents
Advertisement
EMBROIDERY APPLICATIONS
b
Press
position the satin stitching around design.
c
Specify the distance between the pattern
and the appliqué outline.
Memo
• At this time, the pattern and appliqué piece
are grouped.
The steps for creating the appliqué piece are added
to the embroidering order.
122
, and then press
to
Memo
• Three steps are added to the embroidering
order: appliqué cutting line, position of
pattern placement on the garment, and
appliqué stitching.
a Cutting line for appliqué
b Position of pattern placement on garment
c Appliqué stitching
Note
• An appliqué piece cannot be created if the
pattern is too large or too complicated or a
combined pattern is separated. Even if the
selected pattern fits within the embroidering
area, the entire appliqué pattern may
exceed the embroidering area when the
outline is added. If an error message
appears, select a different pattern or edit it.
d
Press
.
e
Fuse or stick a piece of stabilizer to the
back of the felt or denim fabric to be used
as the appliqué piece.
Note
• For best results, be sure to use stabilizer
material for embroidering.
a
b
c
Advertisement
Table of Contents
