Adjusting The Embroidering Position ([Camera Scan] Function) - Brother SKiTCH 888-R00 Operation Manual

Adjusting the Embroidering Position ([Camera Scan] Function)

Adjusting the Embroidering Position ([Camera Scan] Function)
For easier adjustment of the embroidering position, use this
function to import into the app an image of the fabric to be
embroidered.
: App
1
Tap [Layout] after selecting a pattern.
If no machine is selected on the app, [Layout] will not be
displayed. Make sure your machine is selected on the
app's screen.
2
Tap the camera icon in the upper-left corner of the
screen.
 The [Camera scan] function opens the camera
function on your mobile device.
16
3
Place the embroidery frame (with the fabric hooped)
on a flat surface, and then set the entire embroidery
frame in the screen.
IMPORTANT
Do not remove or damage the marks for the [Camera
scan] function. Otherwise, the function will become
unusable.
When using the [Camera scan] function, make sure that
the marks are visible in the screen and are not covered
with fabric, etc.
4
When the embroidery frame outline appears on the
screen, align that outline with the embroidery frame.
Hold your mobile device parallel to the embroidery
frame.
5
After an image is imported, tap [OK].
 The selected pattern appears on the image of the
fabric.
6
Drag the pattern to the desired position.
The pattern can also be rotated.
Tap at the bottom of the screen to make fine
adjustments.
7
Tap [Done].