Table of Contents
Advertisement
BASIC EDITING
g
Touch
to set the starting point to the
center of the pattern.
h
Touch
.
i
Press the "Presser Foot Lifter" button to
lower the embroidery foot.
j
Press
.
k
Press
.
72
l
Press the positioning keys to move the
embroidery frame until the thread mark on
the fabric is aligned on the starting point in
the camera view window.
b
a Grid lines
b Thread mark on the fabric
c Positioning keys
Memo
• Press
to enlarge the camera view. By
enlarging the camera view, you can make a
close adjustment for the needle drop point
moving the embroidery frame little by little.
m
If the pattern position cannot be aligned
using the positioning keys, rehoop the
fabric, and then try again to align the
position with the positioning keys.
Note
• When embroidering the repeated pattern,
you cannot rotate the pattern in the camera
view window. If the pattern is rotated in the
camera view window, you cannot embroider
the pattern properly aligned even if the
thread mark and the starting point are
aligned in the camera view window.
n
Press
to return to the previous screen.
o
Remove the thread mark.
p
Press the "Start/Stop" button to begin
embroidering.
a
c
Advertisement
Table of Contents
