Table of Contents
Advertisement
c
Remove the bobbin cover.
d
Hold the bobbin with your right hand and
hold the end of the thread with your left
hand.
e
Set the bobbin in the bobbin case so that
the thread unwinds to the left.
f
Hold the bobbin lightly with your right
hand, and then guide the thread with your
left hand.
g
Pass the thread through the guide, and then
pull the thread out toward the front.
a Cutter
The cutter cuts the thread.
Note
• If the thread is not correctly inserted
through the tension spring of the bobbin
case, it may cause incorrect thread tension.
(page 102)
a
a Tension spring
CAUTION
• Be sure to hold down the bobbin with your
finger and unwind the bobbin thread
correctly. Otherwise, the thread may break or
the thread tension will be incorrect.
h
Insert the tab in the lower-left corner of the
bobbin cover (1), and then lightly press
down on the right side to close the cover
(2).
i
Press
to unlock all keys and buttons.
LOWER THREADING
21
1
Advertisement
Table of Contents
