Table of Contents
Advertisement
c
Attach the embroidery unit to the machine,
and then turn on the machine.
*
Refer to "ATTACHING THE EMBROIDERY UNIT"
on page 13.
Note
• Unthread the machine to avoid having the
thread slipping out of the needle or getting
caught on the embroidery frame.
d
Press the "Presser Foot Lifter" button to
raise the embroidery foot, and then press
the "Needle Position" button to raise the
needle.
*
The embroidery foot is not raised high enough when
raised with the presser foot lever.
CAUTION
• Make sure that embroidery foot and needle are
fully raised. If scanning is started with the
embroidery foot and needle lowered, the
scanning frame may hit the machine, causing
damage.
e
After attaching the scanning frame to the
embroidery unit, swing the frame-securing
lever toward you to secure the frame.
*
Refer to "ATTACHING THE EMBROIDERY FRAME"
on page 34.
Note
• Be sure not to attach any embroidery foot
other than the embroidery foot "W",
otherwise the embroidery foot will be
scanned.
■ Scanning with an Embroidery Frame
Drawings and illustrations can also be scanned
using an embroidery frame. Hoop the embroidery
frame with fabric larger than the frame. Place the
MY DESIGN CENTER WITH SCAN
paper to be scanned on the fabric, and then secure
it, with tape.
a Fabric
b Tape
Scanning to Trace Background
Image
If you have a favorite picture or drawing, it can
easily be traced on the scanned background image
and you can create your own pattern.
a
Press
.
b
Press
The image display screen appears.
.
4
161
Advertisement
Table of Contents
