Table of Contents
Advertisement
LINE SCAN
*
If you scan the image, make sure that the scanning
frame is attached to the machine. Refer to "Using
the Scanning Frame" on page 160.
Note
• The scanned background image can be
converted to line scan data. At this time, it is
unnecessary to scan the line drawing again.
• When scanning starts, some of the machine
lights will turn off in certain circumstances,
in order to increase the scan quality. The
machine lights will return to their original
brightness when scanning ends.
• You can import an image of 2 MB or smaller
from USB media or SD card.
When the following message appears, press
Scanning begins.
*
To stop scanning and return to the screen in
c
step
, press
166
.
d
When scanning is finished, specify the
"Gray-Scale Detection level" on the screen
if necessary.
The "Gray-Scale Detection level" can change the
black and white threshold for the image.
*
If you do not know how the settings should be
changed, first continue the operation without
specifying settings and check the results.
*
To stop scanning and return to the screen in
c
step
, press
deleted when you return to the previous screen.
e
Move
to frame the image for the
pattern.
f
Press
.
.
The screen for confirming the converted image
appears.
g
In the screen for confirming the converted
image, you can adjust the "Gray-Scale
Detection level" again, if necessary.
a
a The settings for the lines to be sewn appear.
. The scanned image will be
Advertisement
Table of Contents
