Table of Contents
Advertisement
*
"**" in the name "BG**.PNG" will automatically be
replaced with a number between 00 and 99.
■ Positioning the Pattern on Thick
Fabric
When positioning the pattern on thick fabric such as
quilting, the fabric may not be detected correctly. In
order for the fabric to be correctly detected, its
thickness must first be measured.
Memo
• This feature is functional only when the fabric is
scanned. It will not affect embroidering if it is turned
on with normal embroidery.
a
Hoop the fabric in the embroidery frame,
and then attach the frame to the machine.
b
Select the pattern and, if necessary, edit the
pattern and press
c
Display page 10 of the settings screen, and
then set "Fabric Thickness Sensor" to
"ON".
d
Press
.
e
Press
.
f
Press
.
.
VARIOUS EMBROIDERING FUNCTIONS
g
Affix the embroidery positioning sticker to
the fabric within the area indicated by the
red frame displayed with the projector, and
then press
.
h
When the following message appears,
remove the embroidery positioning sticker,
and then press
The carriage is moved, and the embroidery
positioning sticker affixed to the fabric is detected.
i
Continue with step
pattern with the desired embroidery position.
CAUTION
• Use fabrics with a thickness of less than 3 mm
(approx. 1/8 inch). Using fabrics thicker than 3 mm
(approx. 1/8 inch) may cause the needle to break.
.
f
on page 93 to align the
3
95
Advertisement
Table of Contents
