Turning Off Call Forwarding - VTech ErisTerminal ET605 User Manual

ET605 User Manual
The status line and the status info screen will indicate that call forwarding is turned on and the number to
where incoming calls will be forwarded.
Fig. 1
Note: Call forwarding is indicated in the status line, which can display only one message at a
time; forwarding of all calls (Fig. 1) is also indicated by the symbols on the display.
When "Forward when busy" (Fig. 2) and "Forward after timeout" (Fig. 3) are both activated,
"Forward when busy" is shown in the status line. If there are other status messages with a
higher priority than call forwarding (e.g., firmware update available, reboot required, etc.), they
will take precedence over the call forwarding indication.
Press to show the Status info screen with all current status messages, including call
forwarding. When the symbol is not available on the display, you can access Status info from the
Settings menu:
1. Press
2. Press 6 Information.
3. Press 1 Status info.

Turning off call forwarding

Forward all
Press
or
Press
Call Features
Press
Call Forwarding
Press
Forward All
Press
Activate until the
check box
Press
for two seconds to
return to the idle screen
Fig. 2
.
Forward when busy
or
Call Features
Call Forwarding
Forward when Busy
is clear check box
for two seconds to return
to the idle screen
Fig. 3
Forward after timeout
Activate until the
is clear check box
to the idle screen
62
Using the Phone
or
Call Features
Call Forwarding
Forward after Timeout
Activate until the
is clear
for two seconds to return