Example 1, Extension Monitoring And Call Pick-Up - VTech ErisTerminal ET605 User Manual

ET605 User Manual

Example 1, Extension monitoring and call pick-up

This feature makes it possible to pick up a call ringing on another extension, for example when the other
extension is busy or when the user is absent. The prerequisites for this function are:
◦ It must be supported by the PBX.
◦ The extensions must permit this function. Setting: Phone's web interface > Identity (1-2) > SIP tab >
"Allow incoming extension monitoring". The default is on.
◦ Restricting permission to groups of users by setting an ID: Phone's web interface > Identity (1-2) > SIP
tab > "Extension monitoring group ID": Enter an ID (any character string) into the text field.
Note: The first character of the ID must not be a '{' curly brace.
◦ The extension to be monitored must be programmed onto one of the freely programmable function
keys with LEDs. In our example we are monitoring extension 159 on key P2.
1. On the phone's web interface, click on "Function Keys" in the menu on the left.
2. Under "Context" of P2, select Active or one of the configured identities from the drop-down list.
3. Under "Type" of P2, select "Extension" from the drop-down list.
4. Under "Number" of P2, enter the phone number whose calls you wish to pick up. In our example it is 159.
5. Click Apply and Save.
SILKSCREEN ARTWORK | ET605
P2
Note: You can also
use key P2 to dial the
monitored extension.
Rosalyn Chun | 31 May 2018 | vision 2
67
Configuring the Function Keys