Selv (Safety Extra Low Voltage) Compliance; Cleaning - VTech ErisTerminal ET605 User Manual

ET605 User Manual
FCC part 15
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at the user's
expense.
WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Industry Canada
This Class A digital apparatus complies with Canadian requirements: CAN ICES-3 (A)/NMB-3(A).
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Privacy of communications may not be ensured when using this telephone.
The term ''IC:'' before the certification/registration number only signifies that the Industry Canada technical
specifications were met.
This product meets the applicable Innovation, Science and Economic Development Canada technical
specifications.

SELV (Safety Extra Low Voltage) compliance

Safety status of input/output connections comply with SELV requirements.
Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports
contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution
when connecting cables.
C
leaning
To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or
internal electronics of the device.
Safety, Disposal, Cleaning of Product
12