Using The Phone; Making Calls; Selecting Identity For Current Outgoing Call; Using Different Audio Devices - VTech ErisTerminal ET605 User Manual

ET605 User Manual
U
sing the phone
This section describes the functions of the phone with the factory default settings. If your phone was installed
and/or set up by someone else, the default settings may have been changed. Please check with that person or
company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone's web interface. The
default setting is "Name". You can change the setting at Preferences > General Information > "Number Display
Style" by selecting a different option from the drop-down list.
M
aking calls
See "Entering numerals, letters, special characters, and symbols" on page 27 for information on input modes
and entering letters, numerals, and special characters.

Selecting identity for current outgoing call

See "Identities/accounts" on page 69 on how to configure identities.
If more than one identity is shown on the display, the one preceded by the arrow
for the call and the number/name that will show on the callee's phone. Use the down arrow on the navigation
key to select another identity.

Using different audio devices

Handset

• Pick up the handset, enter the phone number, and press
• enter the phone number and pick up the handset.

Headset

Press to activate headset mode, enter the phone number, and press

Speakerphone

Enter the phone number and press or .
49
OR
.

Using the Phone

is the outgoing identity