Internal Cross Hatch Pattern - Runco DTV-1200 Owner's Manual

Internal Cross Hatch Pattern

When Using The Internal Cross Hatch Pattern
The Internal # pattern menu will be displayed if the internal cross hatch pattern has been selected or if no
source is connected to the projector.
Factory Preset Frequencies
The table below lists the 14 fixed factory preset frequencies available.
Another 8 blocks are custom programmable.
To select a desired cross hatch frequency, perform the following:
1 Push the cursor keys
2 Push the cursor keys
3 Press ENTER if the desired block is selected.
kHz/Hz
31.2/50 EDTV
31.5/60 IDTV (Line Doubled)
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HIVISION (1080i/540p)
15.8/60 EGA 1
21.8/60 EGA 2
61.0/76 VGA 1,2
35.5/87 VGA 4
44.2/70 Super VGA 2
48.5/60 Super VGA 1
61.0/76 Super VGA 3
72.1/67 Super VGA 4
89.3/67 SUN 3/260
INTERNAL # PATTERN
kHz/Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
Select with or
then <ENTER>
<EXIT> to return
menu 1
or to highlight the desired cross hatch frequency (menu 1).
or to scroll to another page.
33