Deletion Of Blocks; Deleting Block By Block; Deletion Of All Blocks - Runco DTV-1200 Owner's Manual

Deletion of Blocks

What can be done?
The delete function is used to clear all data (settings) from an adjustment block.
A delete can be given:
- block by block or
- for all blocks.
This item is password protected.

Deleting Block by Block

What can be done?
The 'delete a block' function deletes the settings of a selected block.
How to delete a Block?
1. Push the cursor key
2. Press ENTER to display the delete mode (menu 2).
3. Push the cursor key
4. Press ENTER to delete the selected adjustment block.
A confirmation menu will be displayed (menu 3).
5. Press ENTER to confirm.
Press EXIT to cancel the deletion procedure
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with or
then <ENTER>
<EXIT> to return
menu 1

Deletion of All Blocks

What can be done?
All blocks (all settings) can be deleted at the same time.
How to delete all blocks?
1. Push the cursor key
2. Press ENTER to select.
A confirmation screen will be displayed (menu 2).
3. Press ENTER to confirm
Press EXIT to return without deleting any block.
Once ENTER is pressed, all block headers and adjustment settings are permanently removed
and cannot be restored.
or to highlight Delete a Block (menu 1).
or to select the desired adjustment block.
DELETE MODE
Nr. Src Fh
1 1 15.6
2 3 31.2
3 - 15.6
4 2 31.5
5 - 33.7
6
7
8
Select with
<ENTER> to copy
<EXIT> to return.
menu 2
or to highlight Delete all Blocks (menu 1).
Fv inp conf
50 video FC
60 RGB3S RT
50 intern FC
50 RGB3S FC
60 intern FC
Active block nr. 1
or
62
DELETE BLOCK
!
The selected block
will be deleted!
<ENTER> to confirm
<EXIT> to cancel
menu 3