Geometry Adjustments; Horizontal Phase Adjustments - Runco DTV-1200 Owner's Manual

Geometry Adjustments

What can be done?
The geometry adjustments have to be done only on the green image. These adjustments are automatically
implemented for the other color images. The following adjustments can be adjusted Left-right (EW) and Top-
Bottom Corrections, Blanking, Horizontal Amplitude, Vertical Amplitude, Vertical Linearity and Horizontal Phase.
Start Up
To start up the geometry corrections, perform the following:
1. Push the cursor key
2. Press ENTER to select.
The Geometry menu will be displayed on the screen (menu 2).
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
Select with or
then <ENTER>
<EXIT> to return
Important
The convergence corrections are disabled during geometry corrections. The blanking corrections are only
enabled during the blanking adjustments.

Horizontal Phase Adjustments

Start Up
1. Push the cursor key
2. Press ENTER to activate.
The external image with a text box in the middle will be projected.
Note: No horizontal phase adjustment is available on the internal # pattern.
or to highlight 'Geometry' (menu 1).
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
menu 1
or to highlight 'H Phase' (menu 1).
GEOMETRY
H PHASE
RASTER SHIFT
H SIZE
V LINEARITY
V SIZE
BLANKING
menu 2
Select with or
then <ENTER>
<EXIT> to return
38