Function Keys; Service Menus - Runco DTV-1200 Owner's Manual

Function Keys

What can be done?
Quick access keys to customer pre-programmed adjustments. Almost any adjustment can be added to a func-
tion key. To program a function key, it is necessary to enter into the 'Service Menu'. To activate a function key,
just press the corresponding key.
The following functions are factory pre-programmed :
F1 = EYE-Q Touch up
F2 = Convergence Red on Green
F3 = Convergence Blue on Green
F4 = H & V Size
F5 = Color Balance
How to get an overview of the programmed keys?
1 Push the cursor keys
2 Press ENTER to display an overview of the function keys (menu 2).
3 Press EXIT to return.
MAIN MENU
Image Control
Eye-Q
Function Keys

Service Menus

Select with or
then <ENTER>
<EXIT> to return
Service Menus
What can be done?
With the complete set of Service menus such as EYE-Q, Guide, Random Access, Installation and Service it is
possible to adjust the projector completely.
When entering the Service Menus, a warning will be displayed mentioning that only qualified Runco service
personnel may enter the Service menus.
How to enter the Service Menu?
1 Push the cursor keys
2 Press ENTER to select. A warning will be displayed (menu 2). "Risk of incorrect adjustment of the
projector. The following SERVICE menus are reserved to and to be performed only by qualified
personnel! If qualified, press <ENTER> to continue, or if not, <EXIT> to return.
MAIN MENU
Image Control
Eye-Q
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return
menu 1
or to select 'Function Keys' (menu 1).
menu 1
or to select 'Service Menus' (menu 1).
WARNING
RISK OF INCORRECT ADJUSTMENT
OF THE PROJECTOR.
The following SERVICE menus are reserved to,
and to be performed only by qualified personnel !
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.
menu 2
FUNCTION KEYS
F1: EYE-Q Touch Up
F2: Convergence Red on Green
F3: Convergence Blue on Green
F4: H & V Size
F5: Color Balance
<EXIT> to return
ADJUSTMENT MODE
Select a path from below:
RANDOM ACCESS
Select with
<EXIT> to return
28
menu 2
EYE-Q
GUIDED
INSTALLATION
SERVICE
Source 1
or
then <ENTER>
menu 3