Related Manuals for Runco RUNCO VX-33I VX-33I
Summary of Contents for Runco RUNCO VX-33I VX-33I
- Page 1 N S T A L L A T I O N P E R A T I O N A N U A L VX-33i 1080p, 3-chip Digital Light Processing Projector...
-
Page 3: Runcocare™ Standard Two Year Limited Warranty
1. Runco may update this list of products excluded from this warranty from time to time at Runco’s sole discretion, but updates to the list of covered products will not apply on a retroactive basis. - Page 4 3. Runco Technical Support staff will attempt to correct any minor issues that may be causing the problem. If Runco is unable to fix the problem to the customer’s satisfaction, Runco will issue a Return Material Authorization (RMA) if it is determined that the claim was made within the coverage period of the Standard Limited Warranty.
- Page 5 6. Runco’s warranty does not cover black uniformity issues or other LCD issues associated with usage outside the Runco recommended guidelines and specifications for the product 7. Second day shipment delivery time and availability may vary based on origin and destination and Runco is unable to deliver to PO Box and FPO Box addresses Extended Service Options Runco offers extended and expanded service plans.
- Page 6 Runco. The trademarks reporduced in this Runco Owner’s Manual and used on the Runco Products are either owned by Runco or are licensed by Runco. You may not reproduce or use the trademarks without the prior written consent of Runco.
-
Page 7: Important Safety Instructions
Important Safety Instructions Thank you for your purchase of this quality Runco video product! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation. -
Page 8: Compliance Information
Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety; EN 60950 “Safety of information technology equipment, including electrical business equipment” The Technical Construction file required by this Directive is maintained at the corporate headquarters of Runco International, LLC, located at 1195 NW Compton Drive, Beaverton, OR 97006-1992. - Page 9 The recycling of materials will help to conserve natural resources. This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Runco VX-33i Installation/Operation Manual...
- Page 10 Notes: Runco VX-33i Installation/Operation Manual...
-
Page 11: Table Of Contents
Important Safety Instructions ... vii Compliance Information ... viii 1. Introduction ...1 2. Controls and Functions ...5 3. Installation ...13 Runco VX-33i Installation/Operation Manual About This Manual ...1 Target Audience ...1 If You Have Comments About This Manual..1 Textual and Graphic Conventions ...1 Using This Manual ...2... - Page 12 Configure Lens Motor Trigger ...40 Adjust the Anamorphic Lens ...40 Using the On-Screen Menus ...45 Main Menu...47 Input Source ...47 Aspect Ratio ...47 Picture ...49 Input Position...53 Memory Presets ...54 Information ...54 Calibration ...55 Service ...57 Runco VX-33i Installation/Operation Manual...
- Page 13 5. Maintenance and Troubleshooting ...59 6. Serial Communications ...63 7. Specifications ...69 Runco VX-33i Installation/Operation Manual Lamp Replacement ...59 Filter Replacement ...60 Troubleshooting Tips ...61 RS-232 Connection and Port Configuration ...63 Serial Command Syntax ...63 VX-33i Specifications ...69 VX-33i Dimensions ...71 Supported Timings ...72...
- Page 14 Table of Contents Notes: Runco VX-33i Installation/Operation Manual...
- Page 15 4-2. Typical PLUGE Pattern for Adjusting Brightness ...50 4-3. Typical Gray Bar Pattern for Adjusting Contrast ...51 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint...51 4-5. Typical Test Pattern for Adjusting Sharpness...53 7-1. VX-33i/CineWide with AutoScope Dimensions...71 Runco VX-33i Installation/Operation Manual...
- Page 16 List of Figures Notes: Runco VX-33i Installation/Operation Manual...
-
Page 17: Introduction
Runco has prepared this manual to help home theater installers and end users get the most out of the VX-33i. Runco has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. -
Page 18: Using This Manual
Use the following table to locate the specific information you need in this manual. If you need... Information about obtaining service General information about the VX-33i DLP Projec- Installation instructions First-time configuration instructions Advanced configuration instructions Troubleshooting tips Product specifications ... Turn to page: Runco VX-33i Installation/Operation Manual... -
Page 19: Description, Features And Benefits
The results are simply stunning, with jaw-dropping images that must be seen to be believed! Runco has taken 1080p performance to a new level with this machine and harnessed the brightness and contrast capabilities inherent in 3-chip light engine design for a powerful presentation. -
Page 20: Parts List
Parts List Your VX-33i is shipped with the following items. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23RUNCO. • VX-33i DLP Projector • Remote Control Unit and two (2), AAA-size batteries •... -
Page 21: Controls And Functions
To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees. 4. CABLE OPENING Pass cables through this opening. 5. EXHAUST VENT Runco VX-33i Installation/Operation Manual 2. Controls and Functions VX-33i at a Glance... -
Page 22: Vx-33I Rear Panel
– Flashes blue (one half-second on/one half-second off) for approximately 90 seconds after the system is turned off. 4. ISSUE LED Lights red to indicate an error condition. SERVICE PORT AUTHORIZED PERSONNEL ONLY Please check issue(s) Communication Error Runco VX-33i Installation/Operation Manual... - Page 23 Pressing the MENU button brings up the main VX-33i menu. Also, if you are in an adjustment mode or function, pressing MENU brings the menu back one level. 16. INPUTS Connect your video sources and other equipment to these inputs. Refer to VX-33i Rear Connector Panel on page 8. Runco VX-33i Installation/Operation Manual...
-
Page 24: Vx-33I Rear Connector Panel
(Currently, only RS-232 interface is supported.) 6. 12-VOLT (750 mA) TRIGGER OUTPUTS Connection for up to three (3), 12-volt trigger-controlled devices. These can be retractable screens, screen masks or the Runco CineWide with AutoScope system. WIRED REMOTE REMOTE WIRED Service port. - Page 25 9. COMPOSITE VIDEO INPUT Standard composite video input for connecting a VCR, camcorder or other composite video source. 10. S-VIDEO INPUT A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR. Runco VX-33i Installation/Operation Manual...
-
Page 26: Vx-33I Remote Control
Figure 2-4 shows the VX-33i remote control, and the paragraphs that follow describe its functionality. LIGHT S-VID INFO EXIT CONT PICTURE MEMORY CUST1 NIGHT ASPECT RATIO 16:9 CINEMA FOCUS ZOOM FOCUS ZOOM Figure 2-4. VX-33i Remote Control SOURCE HDMI1 HDMI2 ENTER MENU TINT CUST2 LBOX VWIDE VCINE LENS LENS Runco VX-33i Installation/Operation Manual... - Page 27 Press this button to show or hide the OSD controls. 5. Picture Adjustment Buttons: BRT (Brightness) Press to adjust black level. CONT (Contrast) Press to adjust white level. COL (Color) Press to adjust color intensity. TNT (Tint) Press to adjust color hues. Runco VX-33i Installation/Operation Manual...
- Page 28 (enlarge) or the DOWN button to zoom out (reduce). When finished, press MENU or EXIT. LENS (Lens Shift) To adjust the lens position, press LENS. Then, press and hold the RIGHT, LEFT, UP or DOWN button. When finished, press MENU or EXIT. Runco VX-33i Installation/Operation Manual...
-
Page 29: Installation
• Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the projector, and repeat the operation. Runco VX-33i Installation/Operation Manual 3. Installation Remote Control Notes on Batteries... -
Page 30: Quick Setup
Projector calibration: adjust the following for each input; save settings when finished: • Aspect ratio • Brightness • Contrast • Color level • Tint • Input position For Details, Refer to page... 17, 37 Runco VX-33i Installation/Operation Manual... -
Page 31: Installation Considerations
Images may then appear washed out and less vibrant. Runco VX-33i Installation/Operation Manual Considerations • Shares floor space with audience •... -
Page 32: Throw Distance
2.65 - 4.20 254.40 403.20 Throw Range in Throw Ratio inches, with with Primary 126.9x54-inch (2.35:1) Lens and Screen Anamorphic Lens Minimum Maximum Not Applicable (Note 2) 1.40 - 1.90 177.66 241.11 2.02 - 3.15 256.34 399.73 Runco VX-33i Installation/Operation Manual... -
Page 33: Vertical And Horizontal Position
Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or projector is used in this example. Figure 3-3. Vertical Lens Shift (EXAMPLE ONLY) Runco VX-33i Installation/Operation Manual Ceiling Lens Center Lens Center... - Page 34 Screen Center Screen Width (W) Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or projector is used in this example. Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY) Runco VX-33i Installation/Operation Manual...
-
Page 35: Folded Optics
Figure 3-5. The position of the projector and mirror must be accurately set. If you are considering this type of installation, contact your dealer for assistance. Screen Figure 3-5. Folded Optics Runco VX-33i Installation/Operation Manual Lens Option Apollo B Apollo C 16.80 17.92... -
Page 36: Other Considerations
The projection lens is shipped separately from the projector. To install it, proceed as follows: 1. Loosen the captive Phillips screw at the top of the Projector Front Jewelry. 2. Remove the jewelry. Runco VX-33i Installation/Operation Manual... - Page 37 6. Carefully rotate the lens assembly 45 degrees clockwise until the motor socket connector is aligned with the connector on the flange. Then, gently push the lens assembly in until it is seated flush against the flange and the connectors have seated. Runco VX-33i Installation/Operation Manual...
-
Page 38: Installing The Optional Cinewide Lens Mount
AutoScope lens motor. You will install the CineWide lens after you install the projector and adjust the primary lens. 2. Some components shipped with your projector may differ slightly from what is shown in these instructions. Runco VX-33i Installation/Operation Manual... -
Page 39: Installing The Autoscope Lens Motor (Vx-33I/Cinewide With Autoscope)
Remove Projector Front Feet: Place the projector upside down on a blanket or other soft surface. Loosen and remove the two front feet on the projector. Runco VX-33i Installation/Operation Manual CineWide with AutoScope Ceiling Mt. Adapter/ Projector Stand, Right CineWide with AutoScope Ceiling Mt. - Page 40 Using six (6) each of the supplied, M6 x 12mm Pan-Head Phillips screws (item #2), attach the AutoScope Ceiling Mount Adapters/Projector Stands (items #3 and #4) to the projector as shown in Figure 3-7. Figure 3-7. VX-33i with Ceiling Mount Adapters/Projector Stands DO NOT OVER-TIGHTEN THE SCREWS. Caution Runco VX-33i Installation/Operation Manual...
-
Page 41: Autoscope Lens Motor Installation
Secure the motor to the projector with the six remaining M6 x 12mm Pan-Head Phillips screws (item #2). Figure 3-8. AutoScope Lens Motor Installation After you have installed the AutoScope lens motor, proceed with Mounting the VX-33i (page 27). Runco VX-33i Installation/Operation Manual... -
Page 42: Installing The Fixed Cinewide Base Plate (Vx-33I/Cinewide)
(see Figure 3-9). 3. Secure the base plate to the projector with the screws provided for this purpose. Figure 3-9. Installing the Fixed CineWide Base Plate CineWide Base Plate Runco VX-33i Installation/Operation Manual Screw, Phillips Pan-Head, M6-1.0 x 12mm (4x) -
Page 43: Mounting The Vx-33I
VX-33i and suspend it from the ceiling using a specially-designed ceiling mount fixture. Use only the Runco-approved ceiling mount kit designed for your Note projector (part number 956-0075-00). Install the mount kit according to the instructions provided with it. -
Page 44: Connections To The Vx-33I
HD3 (VGA / Y-Pb-Pr) Y-Pb-Pr) (VGA HD2 (BNC) (BNC) Figure 3-10. HDMI Source Connections HD1 (RCA) (RCA) HDMI or DVI-to-HDMI Cable (sold separately) BD/HD-DVD/ DVD/DTV STB Runco VX-33i Installation/Operation Manual... -
Page 45: Digital (Dtv) Rgb Or Component Video Connections (Hd1, Hd2)
Vert Horiz Red/Pr Blue/Pb Green/Y DTV or Progressive Component (YPbPr) Source Figure 3-11. Digital (DTV) RGB or Component Video Connections (HD1, HD2) Runco VX-33i Installation/Operation Manual WIRED REMO REMOTE HD1 (RCA) (RCA) Vert Horiz Red/Pr Blue/Pb Green/Y DTV or Progressive... -
Page 46: Digital (Dtv) Rgb Or Component Video Connections (Hd3)
HD3 (VGA / Y-Pb-Pr) Y-Pb-Pr) (VGA Green/Y Blue/Pb Red/Pr Horiz Vert DTV or Progressive Component (YPbPr) Source Figure 3-12. Digital (DTV) RGB or Component Video Connections (HD3) Runco VX-33i Installation/Operation Manual... - Page 47 Analog (Computer) RGB Connections: See Figure 3-13. HD3 (VGA / Y-Pb-Pr) Y-Pb-Pr) (VGA HD2 (BNC) (BNC) Vert Horiz Red/Pr Blue/Pb Figure 3-13. Analog RGB Connections Runco VX-33i Installation/Operation Manual Green/Y Personal Computer...
- Page 48 S-Video/Composite Video Connections: See Figure 3-14. HD3 (VGA / Y-Pb-Pr) Y-Pb-Pr) (VGA Figure 3-14. S-Video and Composite Video Connections DVD Player, VCR, Satellite Receiver, Laser Disc etc. Runco VX-33i Installation/Operation Manual...
-
Page 49: Rs-232 Controller Connection
For more information about using this connection, refer to Serial Communications on page 63. to Automation/ Control System or PC Figure 3-15. RS-232 Control System Connection Runco VX-33i Installation/Operation Manual WIRED REMOTE REMOTE WIRED Service port. Not for user access... -
Page 50: Connecting 12-Volt Trigger Outputs To External Equipment
For more information on using the 12-volt triggers, refer to Triggers on page 58. AutoScope Lens Motor (Rear) Retractable Screen or other 12-volt trigger-activated device Figure 3-16. 12-volt Trigger Output Connections Power AC Input Switch 3.5-mm mini plug Sleeve = Ground Tip = +12V Rear Panel HD1 (RCA) (RCA) Runco VX-33i Installation/Operation Manual... -
Page 51: Connecting An External Ir Receiver To The Vx-33I
The input voltage to the AutoScope lens motor must be between Caution 100 and 120 VAC. Do not connect the AutoScope lens motor to a 200-240 VAC power source! Runco VX-33i Installation/Operation Manual Rear Panel WIRED REMOTE REMOTE WIRED Service port. -
Page 52: Turning On The Power
4. Select Installation from the Display Device menu. 5. Choose Floor Rear, Ceiling Front or Ceiling Rear, to match the installation method. You must enter a passcode to access the Service menu. Note Current Input Source Component RCA 480I Runco VX-33i Installation/Operation Manual... -
Page 53: Primary Lens Adjustments
To change the projected image position, use the cursor buttons to highlight “Left,” “Right,” “Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to shift the image in that direction. Runco VX-33i Installation/Operation Manual 3.10 Primary Lens... -
Page 54: Installing And Adjusting The Cinewide Anamorphic Lens
The VX-33i Anamorphic lens mount kit consists of everything shown in Figure 3-18. Some components shipped with your projector may differ slightly from what is shown in these instructions. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23RUNCO. - Page 55 6. Attach the lens to the Lens Adapter Ring by threading it clockwise. Lens threads into ring Figure 3-19. Attaching the Anamorphic Lens to the Lens Adapter Ring Runco VX-33i Installation/Operation Manual...
-
Page 56: Configure Lens Motor Trigger
To do this, press CINEMA on the VX-33i remote control (Figure 2-4), or press repeatedly with no menus visible on-screen. side of the screen: Too Far Left Too Far Right secure the lens in place. repeatedly to highlight “Save.” Then, press Correct position Runco VX-33i Installation/Operation Manual... - Page 57 There may be some pincushion distortion even after the lens is Note properly adjusted, especially at shorter throw distances. If this is the case, Runco recommends that you slightly over-scan the image into the screen frame area to mask the distortion. Runco VX-33i Installation/Operation Manual...
- Page 58 Then, angle the lens to even out any left-right pincushion distortion: Anamorphic Lens (Top View) Correct Position Wrong Position Once the proper lens angle has been set, firmly tighten the Yaw/X-Adjustment Levers to secure the lens in place. Runco VX-33i Installation/Operation Manual...
- Page 59 (When viewed from the front, the rear opening on the anamorphic lens should appear as a tall, narrow oval.) Focus: Finally, rotate the Focus Ring on the anamorphic lens to fine-tune the optical focus. Runco VX-33i Installation/Operation Manual Correct Position...
- Page 60 Notes: Runco VX-33i Installation/Operation Manual...
-
Page 61: Operation
The VX-33i OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on the selected input source and signal characteristics, some menu options may not be available. Runco VX-33i Installation/Operation Manual buttons on the remote control or projector rear 4. Operation... -
Page 62: Input Position
ISF Day - Input Color Chroma Delay Noise Filter Save ISF Settings Back / Confirm Left/Right Up/Down Output Shift Width Height Splash Timer 5 ... 60 sec. Horiz. / Vert. OSD Position (0, 1, 2 ... 100) Runco VX-33i Installation/Operation Manual... -
Page 63: Main Menu
The currently-selected aspect ratio is indicated by a “ selected. The aspect ratio selection is automatically saved for each input and Note resolution. Runco VX-33i Installation/Operation Manual ” to its left; in this example, 16:9 is Main Menu Runco Video Input Source... - Page 64 16:9 4:3 Image on 16:9 Screen (Display) screen. 4:3 Image on 16:9 Screen with VirtualWide On a 2.35:1 screen, the image is 4:3 Image on centered between black bars on 2.35:1 Screen with VirtualWide either side. Runco VX-33i Installation/Operation Manual...
-
Page 65: Picture
Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF certified installation technician. - Page 66 Memory Presets on page 54. Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program material, Runco recommends using the following calibration tools for best results: • External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test DVD or equivalent.
- Page 67 Color Saturation: On your external test pattern source, select a color bar pattern like the one shown in Figure 4-4. Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint Runco VX-33i Installation/Operation Manual...
- Page 68 (on either side of the green bar) appear to be a single shade of blue. Like the brightness and contrast controls, the color and tint controls Note are interactive. A change to one may require a subtle change to the other in order to achieve the optimum setting. Runco VX-33i Installation/Operation Manual...
-
Page 69: Input Position
Height: Select Height from the Input Position menu to change the projected image height. Press to increase the height; press Runco VX-33i Installation/Operation Manual to shift it to the left. to shift it downward. to decrease it. -
Page 70: Memory Presets
Select Information from the Main Menu to display information about the current input signal (resolution, frequency, type et cetera) and installed firmware versions. Should you ever need to contact Runco Technical Support, this information will help them answer your questions or resolve product performance issues. -
Page 71: Calibration
Calibration menu passcode. This makes it possible to restore the picture quality settings to what they were when the projector was installed, simply by recalling the “ISF Night” preset. Runco VX-33i Installation/Operation Manual ISF Night Display Color... - Page 72 Splash Timer: Select Splash Timer from the Calibration menu to set the amount of time the Runco/ISF logo “splash” screen appears when you turn on the projector. The range is from 5 to 60 seconds, in one-second increments.
-
Page 73: Service
When you change the default color space for an HD input, it takes Note effect the next time you select that input (not immediately). Runco VX-33i Installation/Operation Manual ) buttons on the projector rear panel or DHD Service Service... - Page 74 You can assign one or more trigger outputs to each aspect ratio. Those triggers are then activated by selecting that aspect ratio. If your projector is equipped with the Runco CineWide with AutoScope system, assign at least one trigger output (the same one to which the lens motor is connected) to the Cinema and Virtual Cinema aspect ratios.
-
Page 75: Maintenance And Troubleshooting
For lamp or filter replacement, please contact your nearest Runco authorized service center or Runco dealer. Do not attempt to replace the lamp yourself! The VX-33i lamp is under high pressure. Handle it with great care at WARNING all times. -
Page 76: Filter Replacement
Do not reuse filters. 3. Insert the new filter with the pleats facing in and the foam-covered side facing out. 4. Replace the filter access panel and tighten the screws to secure it. Side Filter Access Panel Runco VX-33i Installation/Operation Manual... -
Page 77: Troubleshooting Tips
Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the VX-33i. If the suggested solutions fail to resolve the problem or if you encounter an issue not described here, please contact Runco Technical Support. Table 5-1. Troubleshooting Chart... - Page 78 Notes: Runco VX-33i Installation/Operation Manual...
-
Page 79: Serial Communications
• After sending an ON command, allow at least 30 seconds for the projector to warm up before sending another command. Runco VX-33i Installation/Operation Manual 6. Serial Communications RS-232 Connection and Port Configuration... - Page 80 Table 6-1. Serial Commands and Responses Command Description Turns projector off Turns projector on Display system firmware version information: > rev * Runco Gennum Scaler Board * * Rev 0.31 (T23) 23 Jul 2007 * File Name: Runco_Gennum.ncd Created: 09 Mar 2007 - 14:45:06...
- Page 81 MNR <Enter> MNR <Enter> MNR <Enter> MNR <Enter> MNR <Enter> EXIT <Enter> Adjust Brightness MCOL Adjust Color Level MCON Adjust Contrast MTIN Adjust Tint Runco VX-33i Installation/Operation Manual Response ISF Night ISF Day Custom 1 (none) and/or to make picture (none)
- Page 82 ============================== 7.Color : 00 ============================== STATUS 8 Returns current Tint setting; for example: ============================== 8.Tint : 00 ============================== STATUS 9 Returns current Sharpness setting; for example: ============================== 9.Sharpness : 00 ============================== Status Commands (see description) Runco VX-33i Installation/Operation Manual Response...
- Page 83 1.Power : Power ON 2.Source : Component RCA 3.Aspect : 16:9 4.Memory : ISF Night 5.Brightness : 00 6.Contrast : 00 7.Color : 00 8.Tint : 00 9.Sharpness : 00 10.Resolution: 720P60 ============================== Runco VX-33i Installation/Operation Manual Response (see description)
- Page 84 Notes: Runco VX-33i Installation/Operation Manual...
-
Page 85: Specifications
Control Options: RS-232 Communication 19200 bps, no parity, 8 data bits, 1 stop bit, no flow control Parameters: Runco VX-33i Installation/Operation Manual 15-pin D-Sub connector Discrete infrared remote Serial commands via RS-232 interface Built-in keypad on rear panel 7. Specifications... - Page 86 CSMS measurements. Industry-Standard Specifications These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays.
-
Page 87: Vx-33I Dimensions
Figure 7-1 shows the VX-33i dimensions (all dimensions are in inches). Figure 7-1. VX-33i/CineWide with AutoScope Dimensions Runco VX-33i Installation/Operation Manual 16.26 10.08 3.91 VX-33i Dimensions... -
Page 88: Supported Timings
√ √ – √ √ – √ √ – √ √ – √ √ – √ √ – Runco VX-33i Installation/Operation Manual Composite S-Video – – – – – – – – – – – – – – – –... - Page 89 59.94/60.00 15.734/15.750 PAL-B/G – 50.00 PAL-M – 59.94/60.00 15.734/15.750 PAL-N – 50.00 PAL-60 – 59.94/60.00 15.734/15.750 SECAM – 50.00 Runco VX-33i Installation/Operation Manual Horizontal Pixel Frequency Frequency (MHz) (kHz) 15.734 13.500 31.469 27.000 15.625 14.750 31.250 29.000 37.500 75.250 45.000 74.250...
- Page 90 Notes: Runco VX-33i Installation/Operation Manual...
- Page 92 020-1002-00 rev. A September 2009 Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com...