Convergence Adjustments - Runco DTV-1200 Owner's Manual

Convergence Adjustments

What has to be done?
Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments
are performed on the red image while superimposed on the green image and then on the blue image while
superimposed on the green image. The screen is devided into 81 areas
Start up
1. Push the cursor key
2. Press ENTER to activate.
How to adjust?
1. Use the cursor keys to move the box to the desired zone.
2. Press ENTER to begin the convergence adjustment. Start the convergence adjustment in the center, then
move outward.
3. Use the cursor keys to make horizontal or vertical convergence adjustments in the selected zone (image 1).
4. Press ENTER to move to another zone.
5. Press EXIT to return to the convergence menu.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
Select with or
then <ENTER>
<EXIT> to return
CONVERGENCE
SEL : select area using arrow keys
ADJ : adjust area using arrow keys
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
menu 3
or to select desired adjustment.
menu 1
Green Image
Red Image
CONVERGENCE
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
Select with
then <ENTER>
<EXIT> to return
image 1
49
or
menu 2
CONVERGE
ADJUSTMENT
70
image 2