Runco DTV-1200 Owner's Manual page 21

Dtv capable crt projector
Table of Contents

Advertisement

Input selection modes
Source No.
Projector Input
3
RGB
4/5
RGB (HV, S.O.G)
4/5
Component Video
4/5
RGB with Tri level sync
4/5
Component Video with
Tri-level sync
Input Selection via the Remote.
With the digit buttons, it is possible to select one of the above input modes.
When the source is selected
When a valid and available source is selected, there will be information displayed on the screen about that
source. This information includes:
- Source number
- Horizontal frequency
- Vertical frequency
Source 02
Fh= 63 kHz
Fv= 60 Hz
When the entry is a non valid source number, a warning appears on the screen: 'input not available'.
WARNING
Input not
available
When a valid source number is selected, the projector will display this source or it will wait on the selected
source number until the source becomes available. A message 'source not available' will be displayed for a
short time.
WARNING
Source not
available
When a Video or S-Video source is selected and no decoder is installed, the projector displays the folllowing
message: 'Option not installed'.
WARNING
Option not
installed!
Remote Button No.
3
4 or 5
6
7
8
19

Advertisement

Table of Contents
loading

Table of Contents