Example Of Hydraulic Systems With Hydraulic; Separator - Biasi Inovia 25S ERP User Manual And Installation Instructions

relevant cable clamps "P" (Fig. 6.18).
6.16 Example of hydraulic systems
with hydraulic separator
(optional)
The hydraulic separator creates a reduced
load loss zone that renders the primary circuit
and secondary circuit hydraulically independ-
ent.
In this case the flow rate that passes through
the circuits depends exclusively on the fea-
tures of the pumps flow rate.
Therefore, by means of a hydraulic separa-
tor, the secondary circuit's flow rate is put into
circulation only when the relative pump is on.
When the pump of the secondary is off, there
is no circulation in the corresponding circuit
and therefore, the entire flow rate pushed by
the primary is by-passed through the separa-
tor.
Thus, with the hydraulic separator, it is possi-
ble to have a constant flow rate production cir-
cuit and a variable flow rate distribution circuit.
- 52 -
INSTALLATION
Hydraulic system examples
Top zone + low temperature zone.
Fig. 6.33
Top zone + 2 low temperature zones.
External
probe
Low
temperature 2
Fig. 6.34
External probe
Low temperature
Hight temperature
Low
temperature 1
Hight
temperature