Biasi Inovia 25S ERP User Manual And Installation Instructions page 66

10
11
12
13 14
Fig. 8.31
Fig. 8.32
• Scroll the various parameters using keys 16
or 17 until the letters P02 are displayed on
the LCD display, indicating that "parameter
02" has been activated.
• Press keys 10 or 11 to change the value and
confirm the value of the parameter with key
13.
• Press keys 16 or 17 (Fig. 8.31) to exit with-
out changing the value.
• Repeat all the above setting sequences in
order to visualize the parameters and their
values.
• Set the following parameters as hereafter
indicate:
PARAMETER
Pump speed
NTC on the C.H. re-
turn
• Exiting the "programming mode" is auto-
matic, after 15 minutes, or by cutting power.
- 66 -
ADVANCED COMMISSIONING
17
16
15
VALUES
LCD
(SET)
P 03 00
P 18 01