ADEMCO VISTA-50P Quick Start Manual page 5

1 1 . Use #93 Menu Mode for programming relay voice descriptors
and custom word substitutes.
Refer to the RELAY VOICE DESCRIPTORS section for further instructions
for programming relay descriptors to be annunciated by the 4285 VIP
module, as well as the CUSTOM INDEX section for custom word
substitutes.
12. Use #80 Mode for programming schedules.
Refer to the SCHEDULING section to program open/close schedules,
temporary and holiday schedules, limitation of access schedules, and time
driven events.
1 3 . Define user access codes.
Refer to SECURITY ACCESS CODES section to program authority level,
O/C reporting option, partition assignments, and wireless key assignments
for each user.
1 4 . Exit Programming Mode
Exit programming mode by pressing either *98 or *99. A second entry of
*99 is required if the exit is being done from fields 1*00 and above.
To prevent re-access to Programming mode using the Installer's code, use
*98. The only way to re-access Programming mode is by depressing both
the [*] and [#] keys at the same time within 30 seconds of power up.
Exiting by using *99 always allows reentry into Programming mode using
the Installer's code. Either way of exiting will allow access via downloading.
Note that if local programming lockout is set via downloading, programming
mode cannot be entered at the keypad.
– 5 –