System Layout Worksheets - ADEMCO VISTA-50P Quick Start Manual

SYSTEM LAYOUT WORKSHEETS

As with any security system, you should first define the installation. This includes determining
how many partitions will be used, how many zones per partition, and how many users per
partition. You will also need to determine what peripheral devices will be needed, and basic
system options such as exit/entry delays, etc. The control panel itself should be located in an
area that will facilitate wire runs to all partitions, and will allow access to power and
telephone circuits.
To help you layout a partitioned system, use the following worksheet. This will
further simplify the programming process.
Descriptor
Partition #
(4 char max)
Partition 1
Partition 2
Partition 3
Partition 4
Partition 5
Partition 6
Partition 7
Partition 8
Keyswitch Arming Partition Assignment (1-8):
Wireless Keypad Partition Assignment (1-8):
Use Partition Descriptor (yes/no)?
* At least one user is assigned per partition, regardless of whether or not that partition is actually used. A maximum
of 75 user codes can be programmed in the system.
COMMUNICATION OPTIONS BY PARTITION
Option
Swinger Suppression Count
Cancel Report After Disarm
Dialer Reports for Panic (* + 1)
Dialer Reports for Panic (# + 3)
Dialer Reports for Panic (* + #)
Dialer Reports for Duress
Burglary Alarm Communications Delay
– 20 –
PARTITIONS
Prim. Sec.
Sub. # Sub. #
part 1
00-15; 00=no suppression
(16 sec.)
Alpha Default Message
(32 character maximum)
(enter yes/no)
part. 2 part. 3 part. 4 part. 5 part. 6 part. 7 part. 8