Advanced Mode - Roland Edirol PCR-1 Owner's Manual

Use MIDI functionality

Advanced mode 1

Advanced mode 1 of NOTE ASSIGN lets you specify the velocity value in addition to the items
of Basic mode.
1. Press the [EDIT] button.
2. Slightly move the controller to which you want to assign a Note message. In the case of a
button, press that button.
The display will indicate the number of the selected controller.
3. Verify that the display indicates the correct controller, and press the [ENTER] button.
4. Using the ASSIGNABLE FUNCTION keys (
in the display, then press the [1] key of the keyboard.
5. Press the [ENTER] button.
6. Input the channel.
7. Press the [ENTER] button.
8. Input the note number.
fig.v
9. Press the [ENTER] button.
The display will indicate "V–."
10. Input the velocity.
fig.p
11. Press the [ENTER] button.
The display will indicate "P–."
12. Specify the output port. (➝Specifying the port (p. 62))
13. If you are making an assignment for a button, specify the button mode.
(➝Specifying the button mode (p. 62))
• If you set [S1] – [S8] , [R1] – [R8] to NOTE ASSIGN, setting the controller to the maximum
position will transmit the specified velocity value.
• If you assign this to [B1] – [B6] , the specified velocity value will be transmitted when you
turn the controller on. When you turn the controller off, a note message with a velocity value
of 0 will be transmitted.
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
64
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
) on the keyboard, get "NT0" to appear
*1 Reference
*1 Reference