Roland Edirol PCR-1 Owner's Manual page 40

Getting Connected and Installing Drivers (Macintosh)
Using ASIO Direct Monitor
If the PCR-1's DIRECT MONITOR ON / OFF setting (p. 97) is AUTO, you can
control the PCR-1's Direct Monitor settings from your ASIO 2.0 compatible
software.
1
Open the "Driver Settings" dialog box.
Open the ASIO Control Panel from the Audio Settings dialog box of your
ASIO-compatible application.
2
Check the "Use ASIO Direct Monitor" check box.
3
Click [OK] to close the driver settings dialog box.
40
The name of the Audio
Settings dialog box and the
procedure for opening the
ASIO Control Panel will
differ depending on your
application. For details,
refer to the operation
manual for your
application.
When using ASIO Direct
Monitor, monitoring may
switch on/off at
unexpected times,
depending on the
application settings and on
the recording procedure. If
this occurs, uncheck the
check box in step 2 to
disable ASIO Direct
Monitor.
Depending on your
application, there may also
be an ASIO Direct
Monitor setting among the
audio settings of your
application. For details,
refer to the operation
manual for your
application.