Transmitting The Current Controller Values All At Once (Snapshot) - Roland Edirol PCR-1 Owner's Manual

Use MIDI functionality
Transmitting the current controller values all
at once (SNAPSHOT)
Once you have set the various controllers to the desired settings, you can transmit a detailed
description of this state in the form of a "snapshot". When you execute this function, the current
values of the controllers [R1–R8] or [S1–S8] will be transmitted.
* When the [SHIFT] button is off, [R1–R8] will be transmitted. When the [SHIFT] button is on, [S1–
S8] will be transmitted.
fig.MEMO
This is convenient when you want to record the state of these controllers together at the
beginning of a song in your sequencer, as the initial values.
Snapshot mode (SNAPSHOT)
fig.snap2_90
2
fig.snap
1
Simultaneously press the [MEMORY] button and the [MIDI CH] button.
The [MEMORY] and [MIDI CH] buttons will light.
2
Press the [ENTER] button.
The [MEMORY] button and [MIDI CH] button will blink several times.
The snapshot will be transmitted.
60
1