Setting The Midi Transmit Channel - Roland Edirol PCR-1 Owner's Manual

Setting the MIDI Transmit Channel

To control your sound module, set the PCR-1's current channel to the MIDI receive channel that's
selected on your sound module. Use MIDI Channel mode to set the current channel.
Current channel
The "current channel" is the transmit channel for the keyboard, bender switch, and modulation
button.
* Each controller has its own independent transmit channel setting.
However, if OMNI mode (p. 54) is on, the controllers will also transmit on the current channel you
specify here.
MIDI Channel mode (MIDI CH)
fig.MIDIch-1
3
fig.MIDIch
1
Press the [MIDI CH] button.
The [MIDI CH] button will light. The display will show the current
channel setting.
* The [HEX] or [DECIMAL] button will also light according to the input mode
(p. 54).
2
Use the [DEC] [INC] buttons or the [0] – [F] keys of the keyboard to specify the desired
channel number.
DEC Change the current value by -1
Change the current value by +1
INC
The input value
00–0F
3
Press the [ENTER] button. The current channel has now been set.
1
2
HEX...00–0F
DECIMAL...1–16
Use MIDI functionality
53