Memory Sets - Roland Edirol PCR-1 Owner's Manual

Memory sets

With the factory settings, the GM2 set shown in the illustration is assigned to the controllers.
Use the included template.
The following memory sets are also provided.
GM2 set (MEMORY: 0).................................... (p. 100)
MCR-8 MODE 3 (SONAR 2) SET .................. (p. 101)
MCR-8 MODE 3 (SONAR 2) - A (MEMORY: 1).... (p. 101)
MCR-8 MODE 3 (SONAR 2) - B (MEMORY: 2) .... (p. 101)
MCR-8 MODE 3 (SONAR 2) - C (MEMORY: 3) .... (p. 101)
MCR-8 MODE 3 (SONAR 2) - D (MEMORY: 4).... (p. 101)
MCR-8 MODE 4 (Cubase 5/SX) SET............ (p. 102)
MCR-8 MODE 4 (Cubase 5/SX) - A (MEMORY: 5)(p. 102)
MCR-8 MODE 4 (Cubase 5/SX) - B (MEMORY: 6)(p. 102)
MCR-8 MODE 4 (Cubase 5/SX) - C (MEMORY: 7))(p. 102)
MCR-8 MODE 4 (Cubase 5/SX) - D (MEMORY: 8)(p. 102)
For details on settings for actually using each memory set with your application, refer to the Read Me file for
each memory set, located in the Memory Files folder of the CD-ROM.
Since the PCR-1 does not have controllers [P1] and [P2], the PCR-1 itself is unable to transmit or edit the
messages assigned to these controllers.
(Internally, the PCR-1 does maintain data for [P1] and [P2].)
In order to maintain memory set compatibility with other models in the PCR series, all memory sets include
the data for [P1] and [P2] when they are bulk-dumped.
■ GM2 set (MEMORY: 0)
Parameter
R1 FILTER CUTOFF
R2 FILTER RESONANCE
R3 VIBRATO RATE
R4 VIBRATO DEPTH
R5 VIBRATO DELAY
R6 COARSE TUNING
R7 FINE TUNING
R8 PAN (CHANNEL)
S1 PORTAMENTO TIME
S2 AFTERTOUCH
S3 ENVELOPE ATTACK
S4 ENVELOPE DECAY
S5 ENVELOPE RELEASE
S6 CHORUS
S7 REVERB
S8 VOLUME (CHANNEL)
B1 PROGRAM CHANGE DEC PROGRAM CHANGE
B2 PROGRAM CHANGE INC
B3 PORTAMENTO ON/OFF
B4 POLY MODE ON
B5 MONO MODE ON
B6 GM2 SYSTEM ON
L1 STOP
L2 START
L3 CONTINUE
P1 HOLD
P2 EXPRESSION
100
Message (Hex.)
CC 74(4A)
CC 71(47)
CC 76(4C)
CC 77(4D)
CC 78(4E)
RPN 0/2(00/02) 0/-(00/–) - 127/-(7F/–)
RPN 0/1(00/01) 0/0(00/00) - 127/127(7F/7F)
CC 10(0A)
CC 5(05)
CHANNEL PRESSURE
CC 73(49)
CC 75(4B)
CC 72(48)
CC 93(5D)
CC 91(5B)
CC 7(07)
PROGRAM CHANGE
CC 65(41)
B0 7F 00
B0 7E 01
F0 7E 7F 09 03 F7
FC
FA
FB
CC 64(40)
CC 11(0B)
H-COMPATIBLE (ProTools LE, Digital Performer 3)
SET (MEMORY: 9).................................................. (p. 103)
GS SET ..................................................................... (p. 103)
GS-A (MEMORY: A) .......................................................(p. 103)
GS-B (MEMORY: B).........................................................(p. 104)
GS-C (MEMORY: C) ........................................................(p. 104)
XG SET ..................................................................... (p. 105)
XG-A (MEMORY: D).......................................................(p. 105)
XG-B (MEMORY: E) ........................................................(p. 105)
Range (Hex.) Ch.
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
1
1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
0(00) - 127(7F) 1
min:1(00) -
max:128(7F) -
0(00) / 127(7F) 1
- 1
- 1
- -
- -
- -
- -
0(00) / 127(7F) 1
0(00) - 127(7F) 1
Port
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
-
-
1
1
1
1
2
2
2
1
1