Roland Edirol PCR-1 Owner's Manual page 56

Use MIDI functionality
Program Change Mode (PROGRAM CHANGE)
This mode lets you transmit a program change message on the current channel (p. 53).
fig.PC-1_90
3
fig.program
1
Press the [SHIFT] button so it is lit.
2
Press the [PGM CHANGE] button.
The [PGM CHANGE] button will light. The display will indicate the
program change that was transmitted most recently.
* The [HEX] or [DECIMAL] button will also light according to the input mode (p. 54).
1Use the [DEC] [INC] buttons or the [0] – [F] keys of the keyboard to specify the program
change you want to transmit.
DEC Change the current value by -1
INC Change the current value by +1
The input value
00–0F
3
Press the [ENTER] button.
The program change has now been transmitted.
The setting will be cancelled if you press another button instead of the [ENTER] button.
56
2 1
HEX...00–7F
DECIMAL...1–128