Calling Up Parameter Level 2 - Viessmann VITODENS 200-W Installation And Service Instructions Manual

Calling up parameter level 2

Parameters are split into the following groups:
■
– "General"
– "Boiler"
– "DHW"
– "Solar"
"Ventilation"
–
"Heating circuit 1/2/3"
–
"All parameters"
–
In this group, all parameters are shown in ascend-
ing order (the parameters for the "Solar" and
"Ventilation" groups are only shown if a solar con-
trol module, type SM1 and/or ventilation control
module, type LM1 are connected).
Heating systems with one heating circuit without
■
mixer and one or two heating circuits with mixer:
In the following, the heating circuit without mixer is
designated "Heating circuit 1" and the heating cir-
cuits with mixer as "Heating circuit 2" or "Heating
circuit 3".
If the heating circuits have been designated individu-
ally, the chosen designation appears.
Tap the following buttons:
01. "Menu" or " "
02. "Service"
03. Enter the password "viservice".
04. "System configuration"
05. "Parameter level 2"
06. Enter the password "viexpert".
07. Select group.
08. Select parameter.
09. "Change" or
10. / or / for the required value in line with the
tables below.
11. OK or " " to accept the selected value.
Fig. 42 Display of parameter HO2B
Parameter
A
Description of parameter setting
B
C Number of parameter
Value of parameter
D
Parameter level 2
63